Why Representative Sampling Matters in Biomass Fuel Reception
18.11.2026
Two trucks can deliver the same weight of wood chips and bring different amounts of usable energy to a plant. Moisture accounts for part of that difference. At the same time, moisture can vary within a single truckload. A handful of chips from the surface can give an accurate reading for those chips while giving a misleading picture of the delivery as a whole.
For heating and power plants, representative biomass sampling starts with a practical question: which parts of the load does the sample actually cover? The answer affects how confidently the plant can use its moisture data to estimate fuel energy content, manage deliveries and discuss fuel quality with suppliers.
What makes a biomass sample representative?
A representative sample reflects the material covered by the sampling plan. If the aim is to assess a whole truckload, consider what the sampling method can reach across the load and at different depths. Taking several small portions, called increments, from different parts of the load and combining them can give a better picture of the delivery. Repeatedly collecting from the same accessible spot can leave the same parts of the load underrepresented.
Sample handling matters too. If wood chips lose moisture before testing, the result can shift even when the original sample covered the load well. ISO 18135 describes sampling plans and methods for solid biofuels, including truck deliveries. ISO 14780 covers the preparation of solid biofuel samples for analysis. Together, they provide a starting point for reviewing what happens from collection to testing.
How moisture data supports receiving decisions
For comparable wood fuels, a wetter tonne generally provides less usable energy than a drier tonne. If a sample is drier than the load it represents, the plant may overestimate the energy delivered. The effect on payment depends on how the fuel is priced and which sampling and measurement procedures the buyer and supplier have agreed to use.
Timing also matters. A moisture result available before unloading can help the receiving team decide where to direct a truck. A history of results linked to individual deliveries can help the plant review variation by fuel type or supplier. If the plant plans to use a result for invoicing, the buyer and supplier should agree on the sampling procedure, the measurement method and how to resolve disputed results.
What to check before automating truck sampling
Start with a delivery that is difficult to sample today. Walk through what happens from arrival to unloading, then follow the sample through preparation and analysis. Ask four questions:
- Load coverage. Which locations and depths can the current method reach? Are some parts of the load or particle sizes consistently missed?
- Sample handling. How are increments combined, labelled and stored, and how is the final result linked to the right delivery?
- Timing. When does the result reach the receiving team? Which decisions could the team make differently if it had the result before unloading?
- Verification. How will you compare methods using the fuels you receive, and what evidence will you use to decide whether the new process meets your needs?
The answers give you a basis for assessing whether automation can improve how consistently you sample loads, how you handle samples and when operators receive results. They also help you define what to verify during a trial.
Automated biomass sampling with Prometec
Prometec’s Q-Robot truck sampler collects increments from several locations and depths before unloading. Its Q-Robot M configuration measures moisture during sampling, so the result can be available to the receiving team before the truck unloads.
If you’re reviewing your biomass receiving process, start with the fuels you handle, the sampling method you use today and the decisions you want the data to support. Explore the Q-Robot truck sampler and online moisture measurement.










